10 Inch 150W Home Theater Cinema Active Subwoofer Speaker 

GAM High Power 150W HSD-V10 active subwoofer features an 10-inch driver, 4Ω impedance, and a frequency response of 35Hz-180Hz, delivering deep bass with <0.1% THD. It supports AC110-240V voltage, ensuring global compatibility.

Professional super- bass

Bass is a sound with a thick roaring around 80Hz.Subwoofer is a very deep sound with the frequency extending below 40Hz.Thecombination of the two is super bass,which is divided into active and passive subwoofer.

Thick and stable wooden cabinet

Thicken wooden cabinet structure and wood woodgrain appearance, allowing for sophisticated looks and it can also reduce the resonance of the cabinet which provide clearer bass.

Independent bass adjustment

Control board set independent bass adjustment function.

You can adjust the bass intensity as you like.

Phase adjustment function

0-180 degree phase adjustment, regardless of the forward and reverse signal input, or the placement of the subwoofer in different positions, it can be adjusted to a better output effect.

Designed for Karaoke and Home Entertainment

Classified as a subwoofer specifically intended for karaoke setups and home audio systems, the HSD-V10 features a bass profile tuned to prioritize:

Impact and dynamics, creating an emotionally engaging experience for vocalists.

Precise control, preventing boominess or distortion when played at high volumes in enclosed spaces.

Consequently, this subwoofer is ideally suited for living rooms, home entertainment areas, and small-to-medium-sized home karaoke rooms where enhanced bass is desired without compromising the overall clarity and purity of the sound.

Selectable Features and Models

Depending on the size of the driver (8", 10", 12", or 15") and the cabinet dimensions, various functional control panel options are available.

In terms of functionality, the basic adjustments include: Volume, Frequency, Phase, and Bass Extension.

- Low-Level Connections: Stereo RCA In/Out

- High-Level Connections: Speaker-Level In/Out (Binding Posts) or XLR In/Out

I: Home Theater Systems: Connect to the SUB (SW) subwoofer output port on the AV receiver. If you wish to set up a dual-subwoofer configuration, simply connect to the two corresponding subwoofer ports on the AV receiver; alternatively, you may utilize the HSD-V10's audio source output or balanced output ports.

II: Hi-Fi Audio Systems: If the Hi-Fi amplifier features a SUB (SW) subwoofer output port, simply connect to it directly. If no dedicated subwoofer port is available, connect to the amplifier's stereo audio output ports using a dual RCA audio cable.

III: Stage & KTV Systems: For effects processors, active monitor speakers, and similar equipment—if a SUB (SW) subwoofer output port is present, connect directly to it. If the subwoofer output is a balanced port, use a balanced audio cable for the connection; if only stereo audio outputs are available, use a dual RCA audio cable.

IV: Soundbars: Connect to the dedicated SUB (SW) subwoofer output port on the soundbar, or alternatively, connect to the device's stereo audio output ports.

SPECIFICATION